Job Description

We are seeking Controls Engineering Technicians (L4/L5) to support the deployment, commissioning, operation, and maintenance of mission-critical control systems within large-scale data center environments.

This role supports the systems responsible for monitoring and controlling critical infrastructure, including cooling, environmental, and power distribution equipment. Technicians will work across Building Management Systems (BMS), Building Automation Systems (BAS), and Electrical Power Monitoring Systems (EPMS) in both new construction and operational facilities.

The ideal candidate brings a strong foundation in electrical, mechanical, and networking principles, along with hands-on troubleshooting experience in critical environments where reliability, safety, and procedural compliance are essential.

Key Responsibilities

Commissioning & Deployment

  • Configure, provision, and validate controllers, industrial PCs (IPCs), HMIs, and related control system hardware.
  • Install software, apply configurations, and support system startup activities.
  • Perform point-to-point verification of sensors, controllers, and field devices.
  • Validate communications between field equipment, control systems, and operator interfaces.
  • Support commissioning and startup activities for new data center facilities.
  • Develop and maintain control system graphics and operational displays.
  • Maintain inventories, asset records, and configuration documentation.
  • Execute deployment and commissioning procedures in accordance with established standards and processes.

Operations & Maintenance

  • Troubleshoot control system, networking, communication, and field device issues.
  • Investigate alarms, faults, and performance issues across BMS and EPMS platforms.
  • Diagnose issues involving sensors, relays, controllers, and monitoring systems.
  • Escalate complex issues and implement corrective actions as directed by engineering teams.
  • Document troubleshooting activities, system changes, and resolutions.
  • Support preventive maintenance and reliability initiatives.
  • Adhere to safety, change management, and operational procedures within mission-critical environments.

Required Qualifications

  • Alternatively, 3+ years of directly relevant experience without formal technical credentials.
  • 4+ years of experience in controls, building automation, HVAC controls, instrumentation, commissioning, or a related field with a degree, certification, trade credential, or military technical training.
  • Alternatively, 6+ years of directly relevant experience without formal technical credentials.

Technical Qualifications

  • Working knowledge of electrical, mechanical, and networking fundamentals.
  • Experience supporting control systems, instrumentation, field devices, and industrial communication networks.
  • Ability to read and interpret electrical schematics, wiring diagrams, control drawings, and technical documentation.
  • Experience troubleshooting sensors, relays, controllers, communication networks, and monitoring systems.
  • Proficiency using diagnostic and testing equipment, including multimeters and network troubleshooting tools.
  • Strong analytical and problem-solving skills with a structured troubleshooting approach.
  • Experience following commissioning processes, operational procedures, and change management requirements.

Critical Facilities Experience

  • Experience working in environments where reliability, safety, and operational continuity are critical.
  • Understanding of operational risk and the importance of procedural compliance in live facilities.
  • Ability to maintain accurate documentation and execute work with a high degree of attention to detail.
  • Experience with low-voltage copper and fiber infrastructure.
  • ISA Certified Control Systems Technician (CCST) certification.
  • Military technical experience in electronics, HVAC, controls, instrumentation, or power systems.
  • Previous data center experience.

GCS is acting as an Employment Business in relation to this vacancy.

COMPETITIVE SALARY
Added 17/09/2026
Reference: 21655_1789658794

Other similar jobs

Controls Engineer

Added 17/09/2026

Job DescriptionWe are seeking Controls Engineering Technicians (L4/L5) to support the deployment, commissioning, operation, and maintenance of mission-critical control systems within large-scale data center environments.This role supports the systems responsible for monitoring and controlling critical infrastructure, including cooling, environmental, and power distribution equipment. Technicians will work across Building Management Systems (BMS), Building Automation Systems (BAS), and Electrical Power Monitoring Systems (EPMS) in both new construction and operational facilities.The ideal candidate brings a strong foundation in electrical, mechanical, and networking principles, along with hands-on troubleshooting experience in critical environments where reliability, safety, and procedural compliance are essential. Key ResponsibilitiesCommissioning & DeploymentConfigure,...

Learn more

Controls Engineer

Added 16/09/2026

Role- Controls Technician Location- Raleigh, NCJob Type- ContractContract Duration- 12-Month Contract About the RoleWe are seeking Controls Technicians to support the deployment, commissioning, maintenance, and troubleshooting of Building Management Systems (BMS) and Electrical Power Monitoring Systems (EPMS) across mission-critical data center environments.This is an excellent opportunity for controls, automation, instrumentation, HVAC, and electrical professionals looking to work on large-scale infrastructure projects in a rapidly growing data center sector.Key ResponsibilitiesInstall, configure, and commission BMS and EPMS systems.Perform point-to-point testing of sensors, controllers, and HMIs.Troubleshoot controls, automation, and communication issues.Load software and configurations onto controllers, IPCs, and HMIs.Install, replace, calibrate, and validate...

Learn more

Controls Engineer

Added 16/09/2026

Role- Data Center Controls Technician (BMS/EPMS)Location-Stafford, VA Job Type- ContractContract Duration- 12-Month Contract About the RoleWe are seeking Data Center Controls Technicians to support the deployment, commissioning, maintenance, and troubleshooting of Building Management Systems (BMS) and Electrical Power Monitoring Systems (EPMS) across mission-critical data center environments.This is an excellent opportunity for controls, automation, instrumentation, HVAC, and electrical professionals looking to work on large-scale infrastructure projects in a rapidly growing data center sector.Key ResponsibilitiesInstall, configure, and commission BMS and EPMS systems.Perform point-to-point testing of sensors, controllers, and HMIs.Troubleshoot controls, automation, and communication issues.Load software and configurations onto controllers, IPCs, and HMIs.Install,...

Learn more

Senior Controls Software Engineer - CODESYS / TwinCAT

Added 01/09/2026

Senior Controls Software Engineer - CODESYS / TwinCATLocation: Redmond, WAWork Model: HybridExperience: 5+ YearsJob OverviewWe are seeking a Senior Controls Software Engineer to develop scalable software for advanced industrial automation and material-handling systems.The ideal candidate will have strong hands-on experience with CODESYS V3 or Beckhoff TwinCAT, IEC 61131-3 Structured Text, state-machine programming, and industrial hardware integration.Key ResponsibilitiesDevelop machine-control software using CODESYS V3 or Beckhoff TwinCAT.Program reusable Function Blocks and libraries using Structured Text.Develop CASE-based state machines for machine sequencing and equipment control.Apply object-oriented programming principles to PLC software.Integrate motors, drives, sensors, actuators, photo-eyes, and other automation devices.Configure and troubleshoot EtherCAT...

Learn more

Senior Controls Engineer - Industrial Automation Software

Added 01/09/2026

Senior Controls Engineer - Industrial Automation SoftwareLocation: Renton, WAWork Model: HybridExperience: 5+ YearsAbout the RoleWe are hiring a Senior Controls Engineer with strong software development experience to support advanced automated material-handling and machine-control systems.The successful candidate will develop reusable PLC software and integrate control applications with real-world industrial equipment. Strong experience with Beckhoff TwinCAT or CODESYS, Structured Text, EtherCAT, and state-machine design is highly valued.What You'll DoDevelop and maintain PLC/control software using CODESYS V3 or Beckhoff TwinCAT.Write structured, reusable IEC 61131-3 Structured Text code.Build reusable Function Blocks and control libraries.Develop state-machine-based machine sequences.Implement equipment startup, shutdown, fault, recovery, and safety...

Learn more

Automation Controls Engineer

Added 18/08/2026

Controls Automation EngineerOur client is seeking a Controls Engineer to support the development of next-generation material handling and conveyance control systems. This role involves designing and developing machine control software, integrating industrial hardware, and supporting deployment of large-scale automation solutions.Key Requirements5+ years of experience in industrial automation, controls engineering, or machine control developmentStrong PLC programming experience using IEC 61131-3 Structured TextExperience with Beckhoff TwinCAT, Allen-Bradley, Siemens, or similar PLC platformsProven experience developing state-machine based control logic is nice to haveHands-on experience integrating motors, drives, sensors, actuators, and industrial networksExperience with EtherCAT, EtherNet/IP, Profinet, or ModbusAbility to read electrical schematics and...

Learn more

Controls Engineer

Added 12/08/2026

Controls EngineerJob Title: Controls EngineerLocation: Los Angeles, CADuration: 12+ months ContractOverviewWe are seeking a highly motivated Controls Engineer to support the design, development, implementation, and optimization of industrial automation systems. The ideal candidate will have experience with PLC programming, HMI/SCADA development, industrial networking, system integration, and commissioning within manufacturing or process control environments.ResponsibilitiesDesign, program, and troubleshoot PLC control systems using platforms such as Allen-Bradley, Siemens, or CODESYS.Develop and maintain HMI and SCADA applications for monitoring and controlling automated processes.Configure and integrate industrial communication protocols including EtherNet/IP, Modbus TCP/RTU, OPC UA, and Profinet.Create control strategies, interlocks, alarms, and sequences of operation...

Learn more

Controls Engineer

Added 12/08/2026

Controls EngineerJob Title: Controls Engineer Location: San Fransico, CA Duration: 12+ months ContractOverviewWe are seeking a highly motivated Controls Engineer to support the design, development, implementation, and optimization of industrial automation systems. The ideal candidate will have experience with PLC programming, HMI/SCADA development, industrial networking, system integration, and commissioning within manufacturing or process control environments.ResponsibilitiesDesign, program, and troubleshoot PLC control systems using platforms such as Allen-Bradley, Siemens, or CODESYS.Develop and maintain HMI and SCADA applications for monitoring and controlling automated processes.Configure and integrate industrial communication protocols including EtherNet/IP, Modbus TCP/RTU, OPC UA, and Profinet.Create control strategies, interlocks, alarms, and sequences...

Learn more

Controls Engineer

Added 12/08/2026

Controls EngineerJob Title: Controls Engineer Location: Redding, CA Duration: 12+ MonthsOverviewWe are seeking a highly motivated Controls Engineer to support the design, development, implementation, and optimization of industrial automation systems. The ideal candidate will have experience with PLC programming, HMI/SCADA development, industrial networking, system integration, and commissioning within manufacturing or process control environments.ResponsibilitiesDesign, program, and troubleshoot PLC control systems using platforms such as Allen-Bradley, Siemens, or CODESYS.Develop and maintain HMI and SCADA applications for monitoring and controlling automated processes.Configure and integrate industrial communication protocols including EtherNet/IP, Modbus TCP/RTU, OPC UA, and Profinet.Create control strategies, interlocks, alarms, and sequences of operation...

Learn more

Codesys Controls Engineer

Added 12/08/2026

Controls EngineerJob Title: Controls Engineer Location: Sunnyvale, CA Duration: 12+ MONTHSOverviewWe are seeking a highly motivated Controls Engineer to support the design, development, implementation, and optimization of industrial automation systems. The ideal candidate will have experience with PLC programming, HMI/SCADA development, industrial networking, system integration, and commissioning within manufacturing or process control environments.ResponsibilitiesDesign, program, and troubleshoot PLC control systems using platforms such as Allen-Bradley, Siemens, or CODESYS.Develop and maintain HMI and SCADA applications for monitoring and controlling automated processes.Configure and integrate industrial communication protocols including EtherNet/IP, Modbus TCP/RTU, OPC UA, and Profinet.Create control strategies, interlocks, alarms, and sequences of operation...

Learn more

Controls Engineer

Added 12/08/2026

Controls EngineerLocation: Seattle/Bellevue, WA (Hybrid)Our client is seeking a Controls Engineer to support the development of next-generation material handling and conveyance control systems. This role involves designing and developing machine control software, integrating industrial hardware, and supporting deployment of large-scale automation solutions.Key Requirements5+ years of experience in industrial automation, controls engineering, or machine control developmentStrong PLC programming experience using IEC 61131-3 Structured TextExperience with Beckhoff TwinCAT, Allen-Bradley, Siemens, or similar PLC platformsProven experience developing state-machine based control logicHands-on experience integrating motors, drives, sensors, actuators, and industrial networksExperience with EtherCAT, EtherNet/IP, Profinet, or ModbusAbility to read electrical schematics and control drawingsFamiliarity...

Learn more

Controls Engineer

Added 12/08/2026

Controls EngineerOur client is seeking a Controls Engineer to support the development of next-generation material handling and conveyance control systems. This role involves designing and developing machine control software, integrating industrial hardware, and supporting deployment of large-scale automation solutions.Key Requirements5+ years of experience in industrial automation, controls engineering, or machine control developmentStrong PLC programming experience using IEC 61131-3 Structured TextExperience with Beckhoff TwinCAT, Allen-Bradley, Siemens, or similar PLC platformsProven experience developing state-machine based control logicHands-on experience integrating motors, drives, sensors, actuators, and industrial networksExperience with EtherCAT, EtherNet/IP, Profinet, or ModbusAbility to read electrical schematics and control drawingsFamiliarity with Linux-based industrial...

Learn more

Controls Engineer

Added 10/08/2026

Controls EngineerLocation: Seattle/Bellevue, WA (Hybrid)Our client is seeking a Controls Engineer to support the development of next-generation material handling and conveyance control systems. This role involves designing and developing machine control software, integrating industrial hardware, and supporting deployment of large-scale automation solutions.Key Requirements5+ years of experience in industrial automation, controls engineering, or machine control developmentStrong PLC programming experience using IEC 61131-3 Structured TextExperience with Beckhoff TwinCAT, Allen-Bradley, Siemens, or similar PLC platformsProven experience developing state-machine based control logicHands-on experience integrating motors, drives, sensors, actuators, and industrial networksExperience with EtherCAT, EtherNet/IP, Profinet, or ModbusAbility to read electrical schematics and control drawingsFamiliarity...

Learn more

Controls Engineer

Added 10/08/2026

Controls EngineerLocation: Seattle/Bellevue, WA (Hybrid)Our client is seeking a Controls Engineer to support the development of next-generation material handling and conveyance control systems. This role involves designing and developing machine control software, integrating industrial hardware, and supporting deployment of large-scale automation solutions.Key Requirements5+ years of experience in industrial automation, controls engineering, or machine control developmentStrong PLC programming experience using IEC 61131-3 Structured TextExperience with Beckhoff TwinCAT, Allen-Bradley, Siemens, or similar PLC platformsProven experience developing state-machine based control logicHands-on experience integrating motors, drives, sensors, actuators, and industrial networksExperience with EtherCAT, EtherNet/IP, Profinet, or ModbusAbility to read electrical schematics and control drawingsFamiliarity...

Learn more

Controls Engineer

Added 10/08/2026

Controls EngineerLocation: Seattle/Bellevue, WA (Hybrid)Our client is seeking a Controls Engineer to support the development of next-generation material handling and conveyance control systems. This role involves designing and developing machine control software, integrating industrial hardware, and supporting deployment of large-scale automation solutions.Key Requirements5+ years of experience in industrial automation, controls engineering, or machine control developmentStrong PLC programming experience using IEC 61131-3 Structured TextExperience with Beckhoff TwinCAT, Allen-Bradley, Siemens, or similar PLC platformsProven experience developing state-machine based control logicHands-on experience integrating motors, drives, sensors, actuators, and industrial networksExperience with EtherCAT, EtherNet/IP, Profinet, or ModbusAbility to read electrical schematics and control drawingsFamiliarity...

Learn more
At least 8 characters, 1 uppercase, 1 lowercase and 1 special character or number
Your file must be a doc, docx or pdf. No larger than 5MB.